12 volt electric ball valve CWX-15N
- Description
- Inquiry
Description
12 volt electric ball valve BSP NPT flow control valve actuator ball valve
★ Can work in boiler water room, good substitution for solenoid valve
1. Metal gearbox and POM gear design, low noise, perform reliably
2. Long service life: more than 100000 circles
3. Electric limit and machinery limit design, located accurately, avoid gear run continuously.
4. Mufti-angle assembling, easy to install
5. Float ball structure, no leakage,especially suitable for heavy pollution conditions.
1. Heat energy meters, fire work, save water system
2. Auto control system, industrial mini auto control equipment
3. Water saving equipment, drinking water equipment
4. Air-conditioning fan coil(HVAC)
12 volt electric ball valve
Product model
| Rated voltage
| Working current
| Output torque
| Open/close time
| Control mode
|
CWX-15Q CWX-15N
| DC3-6V DC12V AC/DC9-24V AC220V AC85-265V
| Max100mA (CR04 except Max150mA)
| Max1.5NM Max2.0NM
| <3s <5s
| CR01 CR02 CR02+ CR03 CR03A CR04 CR05
|
Working pressure
| Power
| Medium temperature
| Valve size
| IP Grade
| Product life time
|
Max1.0Mpa | <3W | 0-100℃ | DN8-DN20 DN8-DN32 | IP65 | 100000 times |
12 volt electric ball valve
CR01(two wires and reverse polarity )
Voltage:DC3-6V/12V/9-24V 1.Connecting SW to OPEN , the valve opens , getting the position ,automatically power off, the valve remains fully open position 2.Connection SW to CLOSE , the valve close , getting the position ,automatically power off, the valve remains fully close position | CR02 (three wires two point control) Voltage:DC3-6V/12V/ 9-24V/AC220V 1.Connecting SW to OPEN, the valve opens , getting the position ,automatically power off, the valve remain fully open position 2.Disconnecting SW to CLOSE, the valve close , getting the position and automatically power off, the valve remains fully close position Note:AC24V/AC220V can only be used for CWX-50K series electric valves |
CR02+(three wires two point and fail-safe/power-off return) Voltage:DC 9-24V 1.Connecting SW to OPEN, the valve opens , getting the position and automatically power off, the valve remains fully open position 2.Disconnecting SW to CLOSE, the valve close , getting the position and automatically power off, the valve remains fully close position Note:As the power-off and valve will be return automatically,and RD/G(B)/Y(B) 3wires can not be power-on together to keep valve safe | CR03(three wires one point control) Voltage:DC3-6V/12V /ADC9-24V /AC220V 1.Connecting SW, the valve opens , getting the position, automatically power off, the valve remains fully open position 2.Disconnecting SW, the valve close , getting the position, automatically power off, the valve remains fully close position Note:When power is DC voltage and Red Wires is “+”, Blue wire is “—” |
CR03A( three wires one point control with “-“) Voltage ADC9-24V 1.Connecting SW, the valve opens, getting the position, automatically power off, the valve remains fully open position 2.Disconnecting SW, the valve close, getting the position, automatically power off, the valve remains fully close position | CR04(two wires and fail-safe/power-off return) Voltage:DC3-6V/ADC9-24V/AC220V 1.SW connecting ,the valve open, getting the position and the power off automatically,the valve remains fully open/close position 2.SW disconnecting ,the valve close, getting the position and power off automatically,the valve remains fully open/close position |
12 volt electric ball valve
CR05(five wires micro controller with signal feedback) Voltage:DC3-6V/12V/24V | CR05 wiring description 1.Connecting SW and OPEN , the valve opens , getting the position green wire output the OLS signal , the controller test the signal OLS, connect SW to STOP, the valve stops and remains fully open position 2.Connecting SW and CLOSE , the valve close , getting the position red wire output the CLS signal , the controller test the signal CLS, connect SW to STOP, the valve stops and remains fully close position, Note:Please make sure the signal wires “red”,”black” and “green” be connected at first,then connect the power wires ” yellow” and “blue” |
Lucy Liu
______________________________________
Tianjin Tianfei High-Tech valve Co., Ltd.
Address:NO.16 Rongyuan Road, 300384,Tianjin, China
Email : [email protected] / Web:https://www.valveelectric.com
Phone:+86-18702234196 (Whatsapp / Wechat)