- Description
- Inquiry
Description
24vdc ball valve motorized valve CWX-25S
CR01(two wires and reverse polarity )
Voltage:DC3-6V/12V/24V 1.Connecting SW to OPEN , the valve opens , getting the position , motor automatically power off, the valve remain fully open position 2.Connection SW to CLOSE , the valve close , getting the position , motor automatically power off, the valve remains side passes position(fully closed)
CR02 (three wires two point control)
Voltage:DC3-6V/12V/ 9-24V 1.Connecting SW to OPEN, the valve opens , getting the position , motor automatically power off, the valve remain fully open position 2.Connection SW to CLOSED, the valve close , getting the position , motor automatically power off, the valve remain fully close position
CR03(three wires one point control)
Voltage:DC3-6V/12V /ADC9-24V /AC220V 1.Connecting SW, the valve opens , getting the position , motor automatically power off, thevalve remain fully open position 2.Disconnecting SW, the valve close , getting the position , motor automatically power off, the valve remains fully close position Note:When power is DC voltage and Red Wires is “+”,Blue wire is “—”
CR04(two wires and fail-safe/power-off return)
Voltage:DC3-6V/ADC9-24V/AC220V/AC110V Normally closed: 1.SW connecting ,the valve open, getting the position and the motor power off automatically, the valve remains fully open position 2.SW disconnecting ,the valve close, getting the position and the motor power off automatically, the valve remains fully close position Normally open 1.SW connecting ,the valve close, getting the position and the motor power off automatically, the valve remains fully close position 2.SW disconnecting ,the valve open, getting the position and the motor power off automatically, the valve remains fully open position
CR05(five wires micro controller with signal feedback)
Voltage:DC3-6V/12V/24V 1.Connecting SW and OPEN , the valve opens , getting the position green wire output the OLS signal , the controller test the signal OLS,connect SW to STOP, the valve stops and remains fully open position 2.Connecting SW and CLOSE , the valve close , getting the position red wire output the CLS signal , the controller test the signal CLS,connect SW to STOP, the valve stops and remains fully close position, Note:Please make sure the signal wires “red”,”black” and “green” be connected at first,then connect the power wires ” yellow” and “blue” |
24vdc ball valve