motorized ball valve CWX-25S
- Description
- Inquiry
Description
Features:
1.Mini Dimension suits for small equipment
2.Patented technology
3.Long service life — 50,000- 70,000 times
4.Low working current, suitable for battery driving
5.Manual override is safe and convenient
6.IP65 Enclosure
2.Water treatment
3.Chemical process
4.Small equipment for automatic control
5.Replacing solenoid valve, particularly when solenoid cannot work reliably
Series | Max Torque | Operating Time | Working Voltage | Max Power | Enclosure | Max Pressure | Medium Temperature | Ambient Temperature | Manual | ||
CWX-25S | 2.5N.m | about7S | 5V | 3W | IP65 | 1.0Mpa | 0-100°C | -20°C< t<50°C | Yes | ||
12V,24V | 4W | ||||||||||
110V ,220V | 5W |
Parts | Material |
Actuator housing | ABS |
Valve body | Brass,304,316 |
Valve ball | Brass,304,316 |
Stem | Brass,304,316 |
Ball seat | PTFE |
Seal | Silicon Rubber |
Instructions for Manual override
1.It is only permitted to use when power is cut.
2.Lift the hand-wheel, and turn it left or right until the valve is in place.
3.When the black line on the indicator is horizontal, the valve is on; when vertical, the valve is off.
4.Press down hand-wheel after using manual override in order to work properly when power is supplied. motorized ball valve CWX-25S
CR01 Voltage : DC3-6V/12V/24V | |
Connecting SW with OPEN (RED Wire connect with positive,Green Wire connect with negative),the valve opens, getting the position, motor automatically power off, the valve remains fully open position. Connecting SW with CLOSE (Green Wire connect with positive,Red Wire connect with negative),the valve close, getting the position, motor automatically power off, the valve remains fully close position. | |
CR02 Voltage : DC3-6V/12V/24V/9-24V | |
Connecting SW with OPEN the valve opens, getting the position,motor automatically power off,the valve remains fully open position. Connecting SW with CLOSE the valve close, getting the position,motor automatically power off,the valve remains fully close position. | |
CR03 Voltage : DC3-6V/ADC9-24V/AC85-265V | |
SW closed, the valve opens, getting the position, motor automatically power off, SW open, the valve close, getting the position, motor automatically power off, Note: When power is DC voltage, Red Wire is “+” and Blue Wire is “-“ | |
CR04 Voltage : DC3-6V/ADC9-24V/AC85-265V, auto return which can replace solenoid valve | |
For CR04 normally closed valve:(it can also be normally open) SW closed, the valve opens, getting the position, SW open, the valve close, getting the position, | |
CR05 Voltage : DC3-6V/12V/24V | |
Connecting SW with OPEN, the valve opens, getting the position green wire output the OLS signal,the controller test the signal OLS, connect SW to STOP (power off the valve immediately),the valve stops and remains fully open position. Connecting SW with CLOSE, the valve close, getting the position red wire output the CLS signal,the controller test the signal CLS, connect SW to STOP (power off the valve immediately),the valve stops and remains fully close position. Note: Please make sure the signal wires “red”, “black” and “greed” be connected at first,then connect the power wire “yellow” and “blue” |
motorized ball valve CWX-25S electric ball valve DN15 DN20 DN25 DC3-6v DC12v AC12v AC24V DC24v AC220v