motorized three way ball valve CWX-15N motorised ball valves 3-way
Specification:
1.Model:CWX-15
2.Valve size:DN8-DN25
3.Valve material:brass/SS304
4.Working voltage:DC5V DC12v ADC9-24V,AC85-265V
5.Wiring control mode:CR01 CR02 CR03 CR04 CR05
6.Flow Direction:T type L type
7.Working current:<100mA
8.Power consumption:<2W
9.Working pressure:1.0MPa/145Psi/10Bar
10.Medium:Water,air,gas,fluid
11.Medium temperature:0-100℃
12.Environment temperature:-15-50℃
13.Actuator torque:2.0Nm
14.Open/close time:<5sec
15.Working life:100,000 times
16.Protection class:IP65
17.Actuator material:ABS Engineering plastic
18.Actuator rotation:90 degree
19.Sealing material:Silicon Rubber&PTFE
20.Cable length:35cm
21.Manual override function:No
22.Position indicator:No
23.Special function;OEM&ODM available
electric actuated ball valve CWX-15N motorized ball valves
Features:
1. Smart shape,perform reliably,brass gear,PPO parts,large output torque,long product life for 100,000 times.
2. Electrical limit and machinery limit design,accurate position,avoid gear with switch.
3. Multi-angle assembling,easy to install.
4. Float ball structure,no leakage,especially suitable for heavy pollution conditions.
5.Good substitution for solenoid or pneumatic valve.
6. High protection class,can be worked in moist conditions. IP65.
Situable for :
1.IC card meters,heat energy meters
2.Air-warm valve.HVAC and fire works.
3.Water equipment,auto-control watersystem,industrial mini-auto equipment, Small equipment for automatic control
4.Irrigation equipment,drinking water equipment,solar water heaters,washing machines,water heaters,industrial humidifier.
5.Solar thermal,under-floor,rain water,irrigation,plumbing service,hot water heating and solar glycol loop,ideal for off-grid system.
6.Domestic water,Irrigation system,cooling/heating system,Low voltage plumbing system
7.Multiple voltage and control mode, applicable to a variety of occasions.
electric actuated ball valve CWX-15N motorized ball valves
![](https://www.valveelectric.com/wp-content/uploads/sites/10/2022/08/motorized-valve-CR01.jpg) | CR01 Voltage : DC3-6V/12V/24V |
Connecting SW with OPEN (RED Wire connect with positive,Green Wire connect with negative),the valve opens, getting the position, motor automatically power off, the valve remains fully open position. Connecting SW with CLOSE (Green Wire connect with positive,Red Wire connect with negative),the valve close, getting the position, motor automatically power off, the valve remains fully close position. |
![](https://www.valveelectric.com/wp-content/uploads/sites/10/2022/08/motorized-valve-CR02.jpg) | CR02 Voltage : DC3-6V/12V/24V/9-24V |
Connecting SW with OPEN the valve opens, getting the position,motor automatically power off,the valve remains fully open position. Connecting SW with CLOSE the valve close, getting the position,motor automatically power off,the valve remains fully close position. |
![](https://www.valveelectric.com/wp-content/uploads/sites/10/2022/08/motorized-valve-CR03.jpg) | CR03 Voltage : DC3-6V/ADC9-24V/AC85-265V |
SW closed, the valve opens, getting the position, motor automatically power off, the valve remains fully open position. SW open, the valve close, getting the position, motor automatically power off, the valve remains fully close position. Note: When power is DC voltage, Red Wire is “+” and Blue Wire is “-“ |
![](https://www.valveelectric.com/wp-content/uploads/sites/10/2022/08/motorized-valve-CR04.jpg) | CR04 Voltage : DC3-6V/ADC9-24V/AC85-265V, auto return which can replace solenoid valve |
For CR04 normally closed valve:(it can also be normally open) SW closed, the valve opens, getting the position, motor automatically power off, the valve remains fully open position. SW open, the valve close, getting the position, motor automatically power off, the valve remains fully close position. |
![](https://www.valveelectric.com/wp-content/uploads/sites/10/2022/08/motorized-valve-CR05.jpg) | CR05 Voltage : DC3-6V/12V/24V |
Connecting SW with OPEN, the valve opens, getting the position green wire output the OLS signal,the controller test the signal OLS, connect SW to STOP (power off the valve immediately),the valve stops and remains fully open position. Connecting SW with CLOSE, the valve close, getting the position red wire output the CLS signal,the controller test the signal CLS, connect SW to STOP (power off the valve immediately),the valve stops and remains fully close position. Note: Please make sure the signal wires “red”, “black” and “greed” be connected at first,then connect the power wire “yellow” and “blue” |
electric actuated ball valve CWX-15N motorized ball valves